Apa itu Jaringan Komputer ?

Jaringan Komputer

Jaringan Komputer adalah komputer-komputer yang saling terhubung karena kebutuhan tertentu. Misalnya, jaringan computer yang menghubungkan kantor pusat suatu Bank dengan kantor cabang yang tersebar di beberapa daerah. Dengan adanya jaringan komputer tersebut dapat mempermudah distribusi data / informasi antar kantor pusat – kantor cabang.

Lalu, apa perbedaan jaringan komputer dan sebuah system terdistribusi (distributed System) ?

Sebuah system terdistribusi adalah sekumpulan komputer-komputer yang saling tidak bergantung (independen) tampak kepada penggunanya sebagai system terpadu tunggal.

Saya akan menyuguhkan klasifikasi dari  jaringan computer berdasarkan skalanya.

  1. PAN (Personal Area Network)

Jarak maksimalnya adalah 1 meter atau dengan cakupan 1 meter persegi.

Contohnya adalah Bluetooth (Wireless Network).

  1. LAN (Local Area Network)

Jarak :  – 10 meter (antar ruangan)

  • 100 meter (antar gedung)
  • 1 km (mis. kampus)

Ada beberapa wireless LAN yang standar disebut IEEE 802.11 atau WiFi (Wireless Fidelity). Ada pula yang menggunakan kabel sebagai pengantar data/informasi yang disebut IEEE 802.03 atau Ethernet.

  1. MAN (Metropolitan Area Network)

Mencakupi sebuah KOTA (dengan jarak maksimal 10 km).

Salah satu contoh sebuah MAN adalah JARINGAN TV Kabel.

  1. WAN (Wide Area Network)

Jarak : – 100 km (Menghubungkan 1 Negara)

  • 1000 km (Menghubungkan 1 Benua)

Salah satu contoh WAN adalah Operator Jaringan (kalau di Indonesia, misalnya, Telkomsel, XL dan lainnya).

  1. The INTERNET

Jarak cakupannya adalah planet bumi. Internet menghubungkan penggunanya satu sama lain dengan syarat adanya jaringan yang menghubungkannya.

ANALISIS RANGKAIAN SENSOR Cahaya (LDR) dan LED

Pict

 

English :

After seeing the picture above, There are several issues that need to be Answered:
1. Why PARALLEL LDR linked with R2?
2. Why LDR is under R2?
3. What is the relationship between R2 and R3?

OK >>> I will try to answer the above issue …. 🙂

Problems I: current LDR linked parallel with R2 it will form a series of transistors as switches. As we know, the voltage drop across the LDR is equal to VBE (approximately 0.7 V = voltage drop across the diode).
when exposed to light the LDR LDR R will be LOW, Mis, 0 ohms (resistance I anticipated when light LIGHT), then: Vldr = (0) * 6y / (0 +11) = 0 V. Thus, in these circumstances, the transistors in the open state = LED is off.
LDR when exposed to dim light at LDR then R will be INCREASED, eg, 51 ohm (approximate). then: Vldr = ((51) * 6y) / (51 +11) = 4.93 V, so that the transistors will be closed = LED Lighted.
Second problem: the voltage drop due to current, determining LDR TRANSISTOR be OPEN or CLOSED.
If the position is exchanged LDR R2, the voltage drop across R2 that will determine the conditions Transistor (Open or Closed). because R2 is worth FIXED, FIXED then fall voltage also (LDR effect is very small) so that the transistors maintaining the condition corresponding voltage drop across R2.
Problem III: R2 serves as the components that make up the circuit transisitor as a switch with LDR component.
R3 serves to protect the diode from excessive current and VOLTAGE that can damage the diode.

Indonesian :

Setelah melihat gambar di atas, Ada beberapa masalah yang perlu Dijawab :
1. Mengapa LDR dihubungPARALELkan dengan R2?
2. Mengapa LDR berada di bawah R2?
3. Apa hubungan antara R2 dan R3?

OK>>>Saya akan mencoba menjawab Masalah di atas….:)

Continue reading

Summary Chapter 3 : Modeling in the Time Domain, Norman S. Nise

Bismillaahirrahmaanirrahiim. Halo, my reader and the Seeker Knowledge….

After post/upload about (a half) Summary Chapter 2 the Book Control System Engineering, sixth Ed by Norman S. Nise, I want to continue to next matter that is about Chapter 3 : Modeling in the Time Domain….

>>Thank you to Norman S. Nise<<mount1

I hope This Link Useful for Other Because, because Life is to Share :)….

Click link Below to Download… CHAPTER 3 Modeling in the Time Domain + its Review Question + answer key the RQ……..

CHAPTER 3 Modeling in the Time Domain           Review Question CH3

How make yourself KEEP YOUR OWN “WAY”?

1. You MUST MUCH REMEMBER about ALLAH Ta’ala (DZIKIR)…

2. REMEMBER your DEAD..

3. You must have A CLEAR and “GOOD” GOAL, for Other and You…

4. Looking your around people, many of they that lacked a good thing at around them, specially the people of SYRIA and PALESTINE…

5. AVOID the follow thing,

# 3 Hal Sia-Sia #

Tiga hal yang bisa menyia-nyiakan waktumu:
(1) menyesal tentang sesuatu yang sudah engkau lewatkan, karena hal itu tak bisa kembali,
(2) membandingkan dirimu dengan orang lain, karena itu tak bermanfaat,
(3) mencoba membuat semua manusia ridha, karena itu tak bisa terjadi.

@elmasrw – Dr Ahmad Isa al Mu’sharawi, ketua lajnah tashih al Quran di al Azhar, Doktor ilmu hadits Universitas al Azhar, Mesir.

Control System Engineering

Bismillahirrahmaanirrahiim….

I have Summary Chapter 2 the Book Control System Engineering, sixth Ed by Norman S. Nise.

Thank you to Norman S. Nise

I hope This Link Useful for Other

chpi_1631Because, Life is to Share :)….

Click link Below to Download…

CHAPTER 2 Freq. Domain